SW1114-Main-picture-Silhouette.png

Fast and reliable wrapping

The KUHN SW 1114 is a 3-point linkage mounted, quick-hitch compatible model ideal for 'wrap and stack' operations in the field or in the yard. Wrapping at the storage site means less risk of film damage. A well-suited combination for a one-man wrapping operation.

Find a dealer near you

The KUHN SW 1114 bale wrapper can wrap medium sized square bales, 80x70-90 cm, up to 180 cm in length, and round bales up to 150 cm in diameter. KUHN wrappers rotate bales evenly for exact film overlap, and consistently and tightly wrapped bales. Choose from two different control systems, manual or computer controlled, to best suit your personal preference. The pre-stretchers, film cutters, wrapping table and low-profile chassis design make KUHN bale wrappers simple, easy-to-use, fast and efficient. KUHN bale wrappers, designed with you in mind, provide reliable performance to ensure optimum forage quality throughout the storage period.

The KUHN SW 1114 is a 3-point linkage mounted, quick-hitch compatible model ideal for 'wrap and stack' operations in the field or in the yard. Wrapping at the storage site means less risk of film damage and can be done by a one-man operation. The wrapper can be operated from a loader by the RF remote control, while using a power pack or second tractor for the oil and power supply.
KUHN SW 1114 bale wrapper at work

Your benefits

Fast and reliable wrapping

The square bale turntable wrappers are equipped with two pairs of steel rollers, with a ribbed profile.

Square turntable

The KUHN square bale turntable wrappers are equipped with two pairs of steel rollers, with a ribbed profile. This design creates a deep and stable cradle for the bale, ensuring maximum bale traction, even bale rotation and proper film overlap, whatever the bale size. Two large bale support rollers provide additional stability and guidance. Round bales can also be wrapped with these wrappers.

Conical pre-stretchers

The standard pre-stretchers, which hold a 750 mm roll of film, are made of aluminum to avoid tack build-up. Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of film tearing. The special ribbed profile of the aluminum rollers keeps air and water away from the film. The location of the pre-stretchers makes it very easy to change the film rolls. The standard pre-stretch of 70% is reached by a low-maintenance and low-noise gear transmission. An optional 60% pre-stretcher gear kit can be installed to change the standard pre-stretch to 60% to adapt to difficult wrapping conditions.
Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of film tear.

Hydraulic, high-grip film cutters

Once the desired number of film layers have been applied, the film is then held firmly and cut. A hydraulic, high-grip film cutter allows you to adjust the cutting moment independent of the table tipping position, resulting in the shortest possible end string. It has a long stroke to help accommodate various bale lengths, and ensures a firm hold and a clean cut of the film in various weather conditions.
A hydraulic, high-grip film cutter allows you to adjust the cutting moment independent of the table tipping position

Gentle bale ejection

The low mounted table ensures a gentle bale ejection

Low table height

The low mounted table ensures a gentle bale ejection so there is no need for a fall dampener. The low mounted height also allows easy replacement of the film rolls.

Manual or computer control

KBC 30 bale-and-wrap counter and autostop

Control systems

Two different control systems are available depending on the model and driver preferences:

The manual version (M) is controlled with 2 cable levers, and comes standard with the KBC 30 bale-and-wrap counter and autostop.The bale-and-wrap counter counts the film layers and total number of wrapped bales. The autostop function will automatically stop the wrapping table once the total number of film layers have been applied. This transforms a manually controlled wrapper into a semi-automatically controlled wrapper.

The SW 1114 computer-controlled version (C) with standard RF remote control can be operated from a loader while using a power pack or second tractor for the oil and power supply. This creates a one-man operation for loading, wrapping and stacking. Wrapping at the storage place means a minimum risk of film damage. The C version as standard is fitted with automatic stop at the end of film or film break funtion as well as, VT 30, play/pause function and 90° loading position.

Equipment

A KUHN SW1114 wrapping a round bale in front of a horse stable.

Specifications

Technical characteristics
 
Square bale dimensions (width x height x length) (cm)
Round bale dimensions (width x diameter) (cm)
Maximum bale weight (kg)
Machine length (cm)
Machine width (transport) (cm)
Machine height (cm)
Connection
Ability to wrap round bales
Wrapping table
Bale support rollers
Control
Semi-automatic operation by KBC 30 bale and wrap counter with automatic table stop
Kit for automatic stop by end of film / tear
RF remote control
Fully automatic film cutter
Pre-stretcher unit
Pre-stretch ratio
Film roll magazine
Minimum required tractor hydraulic connections
Oil flow and pressure required
Weight min - max (kg)
SW 1114 C
80 x 70–90 x 180
120–150 x 100–150
1200
310
176
203
3-point linkage cat. 1 & 2 + US U-frame coupler (ISO 11001-1)
as standard
adjustable twin roller pair configuration
2 adjustable rollers
VT 30 computer controlled
-
as standard
as standard
standard hydraulic
single 750 mm
as standard 70 % (60 % optional)
for 4 rolls as option
1 single acting with free return or 1 double acting
26 l/min at 150 bar
1100 - 1250

Media

A SW1114 square bale wrapper, wrapping stationairy in front of a horse stable.