Fast and reliable wrapping
The standard pre-stretchers, which hold a 750 mm roll, are made of aluminum to avoid tack build-up from the film. Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of tearing. The special ribbed profile of the aluminum rollers keeps air and water away from the film. The location of the pre-stretchers makes it very easy to change the film rolls. The standard pre-stretch of 70% is reached by a low-maintenance and low-noise gear transmission. An optional 60% pre-stretcher gear kit can be installed to change the standard pre-stretch to 60% to adapt to difficult wrapping conditions.
Once the desired number of film layers have been applied, the film is held firmly and cut. A hydraulic high-grip film cutter holds and cuts the film automatically without the need for extra controls.
Loading, transporting and wrapping on the go
High stability and weight distribution
The 3-point linkage mounted design positions the weight close to the tractor, which contributes to the stability and weight distribution during wrapping and transport.
Manual or computer control
Two different control systems are available dependent on model and driver preferences. Only two levers control the manual version (M) of the RW 1200, which is equipped as standard with a KBC 30 bale-and-wrap counter and auto satellite stop. This transforms a manually controlled wrapper into a semi-automatically controlled wrapper. The fully automatic computer controlled model (C) is standard equipped with a slow start wrapping speed function to prevent film breakage during startup.
For comfortable satellite rotation during wrapping - stops the tractor from wobbling
Ground support roller
For easier loading and unloading, specifically for smaller tractors.
Extra bale support roller
Provides extra bale support in hilly circumstances.
Turns bales during ejection, allowing them to be positioned on thei flat side after wrapping for easier handling and transport.