RW 1110 wrappers

KUHN RW 1110 wrapper silhouette

Fast and reliable wrapping

The KUHN RW 1110 is a 3-point linkage mounted, quick-hitch compatible model ideal for 'wrap and stack' operations in the field or in the yard. Wrapping at the storage site means less risk of film damage. A well-suited combination for a one-man wrapping operation.

Find a dealer near you

The KUHN RW 1110 is capable of wrapping heavy bales of up to 1200 kg due to its strong large main frame, as standard on all KUHN all static wrappers. The low mounted 4 belt turntable ensures gentle bale ejection so there is no need for an active fall dampener. The low mounting height also allows easy replacement of the film rolls. For a firm cut and hold of the film, even in wet conditions, the wrapper is provided with a spring-loaded high grip film cutter.

The RW 1110 can be equipped with the innovative, unique e-TWIN pre-stretcher. With e-TWIN technology, the wrapping time is reduced by 50% when compared to a single pre-stretch wrapper - saving time.

Choose from the manual controlled version (M) or computer-controlled version with the RF remote control (C) as standard.
KUHN RW 1110 wrapper at work

Your benefits

Fast and reliable wrapping

Wrapping table with 4 belts

Round turntable

The KUHN round bale turntable wrappers are equipped with two rollers and four wide, spaced belts. This design provides a deep and stable cradle for the bale on the wrapping turntable. The two large bale support rollers provide more stability and guidance. The four belts provide maximum traction and even rotation for the bale. Even bale rotation is vital to ensure the optimal film overlap for conservation and crop quality during storage.

Conical pre-stretchers

The standard pre-stretchers, which hold a 750 mm roll, are made of aluminum to avoid tack build-up from the film. Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of tearing. The special ribbed profile of the aluminum rollers keeps air and water away from the film. The location of the pre-stretchers makes it very easy to change the film rolls. The standard pre-stretch of 70% is reached by a low-maintenance and low-noise gear transmission. An optional 60% pre-stretcher gear kit can be installed to change the standard pre-stretch to 60% to adapt to difficult wrapping conditions.
The outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film.

e-TWIN Technology

Besides a standard single stretch application, KUHN offers the unique e-TWIN system for excellent, cost efficient, fast wrapping. The e-TWIN technology enables wrapping via a combined pre-stretcher design with unique film distribution to save 50% on wrapping time and further film savings. The conical pre-stretch rollers have been positioned in such a way that the two 750 mm film wraps with 2/3 overlap are glued together, providing a double layer before they leave the pre-stretcher unit. Optional on selected wrappers is the auto film layer correct kit. The correct kit detects an empty or torn film roll and adjusts the required amount of table rotations to cover the bale with the required amount of layers accordingly.

Unique advantages of e-TWIN:
  • Save 50% wrapping time
  • Further film savings achieved by increased pre-stretch ratio
  • Tightly wrapped bales increases the airtightness and so the quality of feed
  • Extreme tear resistance under all circumstances
  • Available in a manual and computer controlled version.
The conical pre-stretch rollers have been positioned in such a way that the two 750 mm film wraps with 2/3 overlap are glued together providing a double layer before they leave the pre-stretcher unit.

Film cutters

Once the desired number of film layers have been applied, the film is held firmly and cut. A spring-loaded high-grip film cutter holds and cuts the film automatically without the need for extra controls.
A spring-loaded high-grip film cutter holds and cuts the film automatically.

Gentle bale ejection

The low mounted table ensures a gentle bale discharge.

Low table height

The low mounted table ensures gentle bale ejection so there is no need for a fall dampener. The low mounting height also allows easy replacement of the film rolls.

Manual or computer control

The RW 1110 computer-controlled version (C), with standard RF remote control, can be operated from a loader while using a power pack or second tractor for the oil- and power supply.

Control systems

Two different control systems are available depending on the model and driver preferences:

The manual version (M) is controlled with 2 cable levers and comes as standard with the KBC 30 bale-and-wrap counter and autostop. The bale-and-wrap counter counts the film layers and total number of wrapped bales. The autostop function will automatically stop the wrapping table once the total number of film layers have been applied. This transforms a manually controlled wrapper into a semi-automatically controlled wrapper.

The RW 1110 C version is equipped with a computer system. This easy-to-use automatically controlled computer system, features an user friendly interface in line with the VT 30 controlled balers. The wrapper can be operated from a loader with the standard RF remote control with 'high-distance safety', while using a power pack or second tractor for the oil and power supply.

Equipment

RW 1110 wrapping a round bale in front of a goat barn.

Specifications

Technical characteristics
 
Bale dimensions (width x diameter) (cm)
Maximum bale weight (kg)
Machine length (cm)
Machine width (cm)
Machine height (cm)
Connection
Loading system
Wrapping table
Bale support rollers
Control
Kit for automatic stop by end of film / tear
Auto film layer correct kit after first roll is empty
RF remote control
Fully automatic film cutter
Pre-stretcher unit
Film roll magazine
Pre-stretch ratio single stretch
Pre-stretch ratio e-TWIN
Minimum required tractor hydraulic connections
Oil flow and pressure required
Weight min - max (kg)
RW 1110 C
120 x 100–150
1200
290
186
260
3-point linkage, category 1 & 2 + US U-frame coupler (ISO 11001-1)
external
4 belts
single pre-stretcher 2x adjustable / e-TWIN 3x fixed
VT 30 computer controlled
as standard
as standard with e-TWIN configuration
as standard
as standard
single 750 mm or e-TWIN pre-stretcher
for 4 rolls as option
as standard 70 % (60 % optional)
as standard 90 % (70 % and 60 % optional)
1 single acting with free return or 1 double acting
26 l/min at 150 bar
850 - 900

Media