SPRING-LONGER 80 description

Easy-to-operate, compact machine!

Verge mowers with cutting widths from 1.60 to 2.30 m

Find a dealer near you

The SPRING-LONGER 80 Series offer truly professional roadside mowers, designed for high work output.

Available in rear or front mount, the SPRING-LONGER 80 Series is also a benchmark in terms of versatility thanks to its capacity to mow a wide variety of verges. With a 900 mm horizontal offset and a vertical offset as optional equipment, combined with front/rear safety and a 100% efficient mower unit, your investment is guaranteed to be profitable!
SPRING-LONGER 80 Series Verge Mower at work

Your benefits

Easy-to-operate machine

Automatic reset as standard on SPRING-LONGER 80 Series Verge Mowers

Front and rear safety!

To improve on-the-job flexibility and reduce mechanical stress, all SPRING-LONGER 80 Series models are equipped with a double hydraulic safety function. Thanks to the specificity of the cylinder, the mower unit can retract rearwards in the event of a frontal collision, and also forward if an unintentional reversing manoeuvre is made. Resetting is automatic thanks to the 3 accumulaters fitted on the machine as standard.

Built-in reliability!

The uniform design features reassembled, non-tubular components and very high yield steel. It ensures greater mechanical strength while reducing the weight of the structure. All joints are mounted on cell-type bushes.
Non-tubular design and very high yield steel for better mechanical resistance on the SPRING-LONGER 80 Series Verge Mowers

Horizontal pivot offset makes all the difference!

The hydraulic pivot design allows for a large 900 mm horizontal offset. The mower unit can avoid obstacles easily and effectively. The pivot also makes it possible to work behind part of the tractor wheel on narrow paths. The tractor-machine assembly is more compact, providing maximum safety for road users.
A large 900 mm horizontal offset on the SPRING-LONGER 80 Series Verge Mowers means the mower unit can easily avoid obstacles.

Vertical offset: an essential feature!

For maximum versatility, the SPRING-LONGER 80 Series is equipped with a hydraulic lift.

In "flat mowing" and "bank" mode, the lifting cylinder automatically compensates for humps and hollows along the verge. It therefore complements the mower unit slewing cylinder. The mower head lifts, lowers and tilts without any operator action. In "ditch" mode, the vertical offset function lifts the mower unit 600 mm. The universal joint works in a good position with higher ground clearance. The 70° head angle can therefore be used to its full potential. In "clearing" mode, it is possible to mow above road level.
Hydraulic lifting on SPRING-LONGER 80 Series Verge Mowers for maximum versatility

Mower unit: speed and performance

A 120 hp gearbox on the SPRING-LONGER 80 Series Verge Mowers for high working speed

120 hp gearbox

High mowing rates can be achieved due to the geometry of the mower head developed without a “bottleneck”, and its 120 hp gearbox .

XTREM sensor roller as standard.

The rotor bearing is integrated into the gearbox for better protection. The high rotational speed of the rotor (2,530 rpm) guarantees an excellent quality of work. The XTREM sensor roller is equipped with removable ends and a large-diameter tube (168 mm).
XTREM sensor roller as standard on SPRING-LONGER 80 Series Verge Mowers

Quadruple cog-type V-belt drive

To ensure durability, the head friction pads are made of hardened steel, whereas the casing is designed with a double-thick steel plate. The rotor is equipped with wire protection baffles for better protection of the rotor half-bearing. Four automatically tensioned cog-type V-belts drive the rotor. The speed is changed (540 or 1,000 rpm) by simply reversing the pulleys.
The quadruple cog-type V-belt drive on the SPRING-LONGER 80 Series Verge Mowers provides reliability and reduced maintenance costs.

Designed for professional use

The design of the SPRING-LONGER 80 Series Verge Mowers ensures a consistent plant cover and homogeneous strands.

A consistent, uniform cut!

The high rotor rotation speed combined with the geometry of the casing and the shape of the flails provides:
  • The cut is consistent, uncut areas are more visible (including the days following the job).
  • Uniformly cut strands over the entire surface of the verge. The strands decompose more quickly: the risk of leaching at the bottom of the ditch is reduced.
SPRING-LONGER 80 Series Verge Mower at work

Specifications

Technical Characteristics
 
Position of the mower unit
Recommended use
Horizontal reach (m)
Horizontal travel (mm)
Vertical travel with leg (mm)
Hydraulic mower unit break-back safety with automatic reset
Transport height (m) with 0.5 m ground clearance
Transport width (m)
Lighting system
Max. ditch angle (°)
Max. bank angle (°)
Machine weight (kg)
S 1680 RPFS 1680 RPFL1680 RPLS 2080 RPFLS 2080 RPS 2080 RPFS 2080 RPLS 2380 RPL
Front right mower unitFront right mower unitRear right mower unitFront right mower unitRear right mower unitFront right mower unitRear right mower unitRear right mower unit
Grass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditchesGrass verges and scrub along roadsides, canals and ditches
3.503.503.503.903.903.903.904.20
Pivot, 900Pivot, 900Pivot, 900Pivot, 900Pivot, 900Pivot, 900Pivot, 900Pivot, 900
600600600600600600600600
Forward safetyForward safetyForward and reverse safetyForward safetyForward and reverse safetyForward safetyForward and reverse safetyForward and reverse safety
2.602.602.603.003.003.003.003.30
1.911.911.911.911.911.911.911.91
As standard (with work lights)As standard (with work lights)As standard (with bumper)As standard (with work lights)As standard (with bumper)As standard (with work lights)As standard (with bumper)As standard (with bumper)
- 70- 70- 70- 70- 70- 70- 70- 70
+ 90+ 90+ 90+ 90+ 90+ 90+ 90+ 90
12851285128513651365136513651425
Drive
 
PTO speed (rpm)
Drive
S 1680 RPFS 1680 RPFL1680 RPLS 2080 RPFLS 2080 RPS 2080 RPFS 2080 RPLS 2380 RPL
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
540 or 1000 by reversing the pulleys - Direction of rotation: as standard,
1000 rpm PTO rotates to the right in the forward direction
Quadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt driveQuadruple cog-type V-belt drive
Mower unit
 
Cutting width (m)
Rotor speed (rpm)
Rotor diameter (mm)
Spoon flails
Shackle diameter (mm)
XTREM sensor roller diameter (mm)
Anti-projection flaps
S 1680 RPFS 1680 RPFL1680 RPLS 2080 RPFLS 2080 RPS 2080 RPFS 2080 RPLS 2380 RPL
1.601.601.602.002.002.002.002.30
2 5302 5302 5302 5302 5302 5302 5302 530
152152152152152152152152
4242425454545460
1414141414141414
168168168168168168168168
As standardAs standardAs standardAs standardAs standardAs standardAs standardAs standard
Hitch
 
Hitch category
STABI-LINK quick hitch with two coupling yokes
S 1680 RPFS 1680 RPFL1680 RPLS 2080 RPFLS 2080 RPS 2080 RPFS 2080 RPLS 2380 RPL
Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3Semi-automatic hitch, cat. 2 & 3
--Optional-Optional-OptionalOptional
Tractor recommendations
 
Minimum PTO power requirement kW (hp)
Recommended tractor weight (tonnes)
Front hitch
Control from tractor
S 1680 RPFS 1680 RPFL1680 RPLS 2080 RPFLS 2080 RPS 2080 RPFS 2080 RPLS 2380 RPL
59 (80)59 (80)59 (80)59 (80)59 (80)59 (80)59 (80)59 (80)
553.553.553.53.5
Heavy-duty front hitch: 4 to 4.5Heavy-duty front hitch: 4 to 4.5-Heavy-duty front hitch: 4 to 4.5-Heavy-duty front hitch: 4 to 4.5--
1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector1 SA + 1 DA + electric circuit selector

Media