HR 1020-1030-1040 silhouette

A perfect seedbed in all conditions

3 to 4 m working width for HR 1020-1030-1040 rigid power harrows.

Find a dealer near you

KUHN's new range of HR power harrows has a model to suit every condition as well as options adapted to your requirements. The HR 1020, 1030 & 1040 series power harrows with working widths of 3 to 4 m, can work in solo or in combination with a seed drill. The HR 1040 series power harrows are ideal for high-powered tractors up to 320 hp. Hydraulic adjustments make  your job easier, and as work output is one of our priorities too, our power harrows have been developed to extremely high standards, to ensure you are able to work non-stop.
HR 1020-1030-1040 at work

Your benefits

A perfect seedbed in all conditions

The attachment components of the VENTA seed drill are fitted to the packer frame of the HR power harrow

The seed drill mounted onto the roller frame

When coupled with a seeding combination, the power harrow depth and the seeding depth work completely independantly of each other. This is because the drill in mounted on the roller frame. This also increases stability, and guarantees accurate seed placement. These power harrows are designed to work with both pneumatic and mechanical seed drills.

Tines, rotors and levelling bar adapted to your conditions

The specific design of the tine helps create a fine tilth with a working depth of down to 20 cm. The HR 1040 series features 335 mm tines to perform in the most challenging conditions. Duplex gearboxes make it possible to adapt rotor speed to working conditions. Speed can vary between 255 and 539 rpm for the 1040 series to achieve excellent seeding quality in very difficult conditions. Depending on the series, depth and levelling-bar position are hydraulically adjustable from the cab to adjust the machine on the move.
HR 1020-1030-1040 power harrows with adustable levelling bar

Perfect levelling between passes

Long and deep profiled side deflectors ensure a perfect finish between two passes. They are quick and easy to adjust with spring safety and double-arm attachment for optimum hold.
Long-profile side deflectors ensure a perfect finish between two passes.

The benchmark for reliability

Central gearbox with oil cooling system on HR 1040

A gearbox with a difference

The central gearbox is equipped with an oil cooling system on 1040 series machines. The integrated pump and additional oil tank cools the oil before re-injecting it into the gearbox. With greater oil cooling capacity, the horsepower rating increases.

A linkage adapted to all tractors

The standard coupling type is category 2 and 3 with the possibility of adapting to large tractors with cat. 4 quick hitch. Two connection points are possiblr, to position the machine closer to the tractor if required. The central gearbox is set back on the machine to reduce the angle of the PTO when turning on the headland.
HR Power Harrows and the linkage possibilities

FAST-FIT blades as standard

The standard tines are equipped with a quick release system, a heavy duty protected linch pin holds the locking mechanism in place, simple remove it, the locking pins will drop down and the tines can slide out. The tines are straight with lengths of 315 mm (1020 and 1030 series) and 335 mm (1040 series).
FAST-FIT blade attachment as standard on HR power harrows

Reliable rotor: copied but never equalled

Cross section of KUHN's power harrow rotor

The perfect rotor design

The powerful rotor driveline is fully protected by a rigid gear case. The casing, bearings and tine holders form a compact and highly robust unit reducing torsion stress on the housing. The small distance between the casing and the blade holders prevents stones from getting jammed and channels soil-flow through the tines. The rotor has a maintenance-free and highly rigid trough. There is no gearwheel overhang thanks to convex gearwheels in forged steel which run in line with the upper bearings. The bearings require no maintenance; they are perfectly aligned in the one piece rotor drive casing so are not subject to distortion. Reinforced sealing is ensured with a cassette seal on HR models. Conical centring of blade holders (KUHN patent) prevents play on the splines. The blade holders are oval to prevent stones from getting jammed and facilitate their flow-through the machine.

Equipment

A wide range of equipment is available such as track eradicators and stone deflectors. The wide choice of rollers will meet all of your requirements.

HR 3040 and VENTA 3020 seeding combination at work

Specifications

Technical Characteristics
 
Working width approx. (m)
Transport width (m)
Maximum tractor power (kW/hp) at 1000 min-1
Minimum power requirement (kW/hp) at 1000 min-1
Required tractor hydraulic equipment
Gearbox
PTO safety
PTO speed (min-1)
Rotor speed (min-1)
Number of rotors
Working depth adjustment
Levelling bar
Side deflectors
Hitch
Approx. weight (kg) with Maxicrumbler roller Ø 520 mm
Approx. weight (kg) with Maxipacker roller Ø 535 mm
Approx. weight (kg) with Megapacker roller Ø 590 mm
Approx. weight (kg) with Packliner roller 12.5 cm row spacing Ø 592 mm
Approx. weight (kg) with Packliner roller 15 cm row spacing Ø 592 mm
Approx. weight (kg) with Steelliner roller 12.5 cm row spacing Ø 550 mm
Approx. weight (kg) with Steelliner roller 15 cm row spacing Ø 550 mm
HR 3020 HR 3520 HR 4020 HR 3030 HR 3530 HR 4030 HR 4530 HR 3040 HR 3540 HR 4040
3.00 3.50 4.00 3.00 3.50 4.00 4.50 3.00 3.50 4.00
3.00 3.50 4.10 3.00 3.50 4.10 4.55 3.00 3.50 4.10
132 / 180 139 / 190 146 / 200 176 / 240 183 / 250 190 / 260 197 / 270 219 / 300 226 / 310 234 / 320
59 / 80 66 / 90 73 / 100 59 / 80 66 / 90 73 / 100 80 / 110 66 / 90 77 / 105 88 / 120
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the depth - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the depth - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the depth - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the depth - optional eq.
1 DA for the levelling bar - optional eq.
1 DA for side makers - optional eq.
1 DA for 4 function hydr. selector - optional eq.
1 DA for the levelling bar
1 DA for the working depth
1 DA for the levelling bar
1 DA for the working depth
1 DA for the levelling bar
1 DA for the working depth
DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX with oil circulation DUPLEX with oil circulation DUPLEX with oil circulation
Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch Cam type cut-out clutch
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
290 - 330 (after inversion) 290 - 330 (after inversion) 290 - 330 (after inversion) 290 - 330 (after inversion) 290 - 330 (after inversion) 290 - 330 (after inversion) 290 - 330 (after inversion) 296 - 463 (after inversion) 296 - 463 (after inversion) 296 - 463 (after inversion)
10 12 14 10 12 14 16 10 12 14
Hydraulic Hydraulic Hydraulic
As standard - with hydraulic adjustment As standard - with hydraulic adjustment As standard - with hydraulic adjustment
Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm Adjustable - with spring safety and double arm
3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes 3-point - Cat. 2 - 3, 3N and 4N - yokes
1320 1365 1478 1430 1490 1618 1913 1615 1690 1830
1569 1658 1809 1679 1783 1949 2289 1865 1985 2160
1611 1706 1871 1721 1831 2011 2341 1910 2030 2225
1685 1779 1956 1795 1904 2096 2439 1980 2105 2310
1672 1763 1937 1782 1888 2077 1970 2090 2290
1659 1762 1921 1769 1887 2061 1955 2090 2275
1625 1730 1889 1735 1855 2029 1920 2055 2240

Media