Arable farm beats the winter with proven establishment system

Power harrow combination drills are still popular in Scotland where the weather has a large bearing on drilling windows. However, a 6m KUHN model is proving the ultimate versatile machine on a farm hundreds of miles further south.

Will Hitchcock Testimonial Image

A Suffolk arable farm has kept to its original cropping plans this season thanks to an investment in a mounted power harrow combination drill which has allowed seed to be established successfully even when drilling on wet soils. 

Power harrow combis may not be the most fashionable drill but, for Guy Hitchcock and his son Will, their new KUHN 6m HR 6040RCS power harrow, with BTFR 6030 seeding unit and TF 1512 front tank, has more than proved its worth this year. The seeding setup, powered by a John Deere 8RX 410, has replaced a 6m Horsch trailed power harrow combination. Will says the KUHN unit has travelled where others couldn’t this winter. 

“It is one of the wettest years we’ve known, and to say that we have managed to get every seed in the ground that we planned to at the start of the drilling season is nothing short of a miracle. Our drilling outfit has been key to getting the crops in the ground. The crops have come out of the spring looking good, and we’ve only re-drilled 3ha of field corners, which was originally drilled with our previous machine.” 

Chapel Farm in Ringshall, Suffolk, is the main base for the 800ha arable farm growing first wheat, oilseed rape, spring barley, winter rye, and winter beans. However, the crop that governs the rotation is sugar beet, which has been a mainstay on the farm for several decades. 

“We’ve always run a power harrow combination drill, as it is integral to getting land prepared and a crop established in one pass following sugar beet harvest. We run a sugar beet harvester, cleaner, chaser, and two drills, and are contractors across Suffolk, so the crop is essential for us to get right, but we need to have the right machinery following sugar beet harvest.” 

Will Hitchcock Testimonial BTFR working in field

Improved weight distribution


The KUHN combination arrived on farm just before Christmas 2023 from local dealer Ben Burgess, and part of the reason for changing from a trailed to a mounted setup was to maximise the 8RX’s weight distribution. The tractor carries out all field operations, from ploughing with a recently purchased KUHN MASTER MM183, to pulling a 4m KUHN PERFORMER.  

The BTFR combination was chosen to offer a better weight division across the tractor, with the TF seed hopper counteracting the power harrow and seeding unit at the rear. In comparison, the Horsch drill’s seed tank is mounted on the rear frame, which meant all the weight was being towed and wheelings could be seen in wet conditions. With the 8RX fitted with a front linkage, Will says it allowed the farm to reconfigure its drilling setup to suit the operations and conditions better and avoids the need to carry a ballast weight. 

“When John Deere launched the 8RX we took delivery of an early unit. We used to run twin-track crawlers, but these struggled turning in wet conditions and we could instantly see the benefits of a track unit on each corner and how it would allow us to drill when conditions were less than perfect,” says Will.  

“We like the Horsch drill but the weight on the whole implement was becoming an issue for us. We are planting a crop in 10 months of the year, so having the machinery that allows us to get across the ground in all conditions is paramount.”

No blocked coulters


The KUHN combination is the only cereal drill on the farm and sows upwards of 600ha per year, and, since January, it has drilled 300ha, and Will has even contracted into some neighbouring farms to help them get drilled up. During this time, between Will and his sister Katherine, who also operates the drill, there hasn’t been one blocked coulter and Will admits that they have drilled in some testing conditions. 

“If we haven’t blocked a coulter this year, I’m really not sure how you can block one,” says Will. “When the drill arrived, we set it up on a 3.5ha field I had ploughed the night before after an inch of rain. I was convinced we would have issues as the conditions were rotten and we wouldn’t have taken the Horsch in there. However, the KUHN setup managed it without blocking a coulter once, with no misses, and the crop looks great now. This was the only evidence we needed to know we had bought the right drill for our workload.”  

Will admits to being quite amazed at some of the land he has been able to drill, and he says the farm hasn’t regretted getting crops established, even in the poor conditions, as the good seed to soil contact at the time of drilling gives crops the best chance. Output in good conditions is up to 30ha/day with an average speed of 7kph, while less-than-ideal conditions require a slower speed and 20ha/day output.

Offset discs

Part of the drill’s ability to cope in wet conditions is down to the offset disc arrangement on KUHN’s Seedflex coulters, which allows mud and debris to escape easily, rather than being sandwiched between two parallel discs. Once the seed has been placed in the slot, the following press wheel and thicker covering tines, with angled ends, provide good soil coverage over the seed slot.

Will Hitchcock - BTFR & TF Seeder coulter bar

“We used to experience mud compacting between the discs in our old drill, which would eventually cause blocked coulters as it has no way of clearing itself. This meant downtime to clean them out when it happened. Another benefit of the mounted machine is that we can lift it up over wet spots, rather than having to drag it through and risk getting stuck. This has saved the unit from becoming stuck at various points during the campaign.” 

Further to this, the BTFR seeding unit can be lifted independently of the power harrow, which helps prevent the coulters running in poor soil conditions. The view of the coulters from the tractor is also helped without a hopper to obstruct, while the distribution head and Vistaflow lights on each outlet are also in direct view of the operator. The clod boards and power harrow depth control are hydraulic, which helps to adjust easily from the cab.

Will Hitchcock - Vistaflow distribution head

KUHN and Ben Burgess have also been quick to sort any issues, including a speed sensor on the power harrow, and fitting scrapers on the packer roller end plates to prevent excess dirt building up where the rollers meet, which had caused grease nipples to break off during early use.  

“The service backup we receive from Ben Burgess is excellent and KUHN’s support from Telford is one of the reasons we went for the drill. We were impressed at the parts stock in the UK, but, if they don’t have it on a shelf there, it can be shipped over from France on a next day service, so we will only ever be down for a short period.” 

Front tank versatility

When the farm bought the John Deere 8RX, they specified it with a front linkage kit. Although it wasn’t required at the time, for the small relative cost it added to the tractor, it has offered the flexibility to fit front mounted implements, such as the TF front tank. Potential further benefits of the front tank are possible by using it to supply fertiliser to the farm’s KUHN KOSMA precision drill.  
 

Calibrating has also been made easier for Will. The KUHN TF 1512 front tank has a single calibration barrel, which takes under three minutes to complete, and he is confident only doing it once rather than repeating the process to check it was correct. The Isobus display runs through the John Deere Command Centre display and can save calibration settings, which is handy if he switches between different crops.

Well Hitchcock - JD ISOBUS

There is also a light under the front tank to illuminate the area for calibration at night, and Will has added a small hook to hold the scales. The reduced loading height for seed has also come in for praise.

Will comments: “We are safer loading seed in the TF hopper as the operator can stand on the ground with the tank lowered to split the bags, which prevents climbing up steps as was the case before. It’s more like loading a fertiliser spreader than a drill. 

“We have lost a bit of capacity as the hopper holds 1.5t, which may seem small for most large arable units. However, the option to drill when other drills would be stopped, more than makes up for it.” 

Will Hitchcock - BTFR and TF front tank

Additional output

Although blackgrass is a persistent problem for many cereal growers, Will says the farm is lucky to not consider it too much of an issue. Due to this, he is considering adding a conventional cereal drill to the ranks to offer increased output earlier in the drilling campaign before the wet weather turns.

 “We have just ordered a 6m KUHN ESPRO to offer us flexibility in September and early October. It has an increased forward speed compared with the power harrow combi, but also more options when preparing land for drilling. 

“That said, the flexibility of the power harrow means we could never rely on a conventional drill for everything. This was proved when we helped neighbours this year who couldn’t get spring crops established,” concludes Will.

Will Hitchcock - BTFR & TF Front Tank working in a field