Single vertical auger EUROMIX I silhouette

100% functional design!

EUROMIX mixer with 1 vertical auger and lateral distribution, featuring narrow hopper. Available in 8, 10 and 12 m3 capacities, for dairy herds of between 40 and 90 cattle.

Find a dealer near you

Single vertical auger EUROMIX I mixer wagons are perfect for simple and effective mixed rations. These models are best for farmers requiring a simple and functional machine.
This modular machine can operate in all building configurations, with distribution on the front right and/or rear left, via a chute or tilting conveyor.
Available with standard direct controls, you can control the entire machine from the tractor cab. The small diameter of the mixing auger on the EUROMIX I 870, 1070 and 1270 models reduces the power requirement: 60 hp for the 8 m3 model.
Single vertical auger EUROMIX I at work

Your benefits

High mixing quality for optimum rumination!

Loading comfort and accuracy of the KUHN EUROMIX I mixer

Loading comfort and accuracy!

The EUROMIX mixer tub geometry was designed to make bucket loading easier. The large opening allows for clean and easy loading - even with larger buckets. Depending on the model, the top part of the EUROMIX tub can be fitted with a reinforced rim or an extension with a cross-section ring, to guarantee a longer machine service life. So even if the machine is hit by the loader, the tub structure will not be damaged.

Exclusive KUHN mixing auger!

The double-pitch angle of the auger enables quick breakdown of feed including whole bales, no matter how full the machine already is.
To reduce power consumption, the EUROMIX range is equipped with asymmetric knives which give a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.
The auger material and design has been selected to provide maximum resistance to wear.
Exclusive KUHN mixing auger on EUROMIX I mixer

Tried and tested transmission and drive systems!

The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.
Transmission representing KUHN's extensive experience and technological expertise.

Even quicker chopping and mixing

The EUROMIX tubs are polygonal so as opposed to “rolled” bodies, the tubs have multiple sides. This design greatly improves machine resistance to strain, particularly when breaking down whole bales. This design also saves time when chopping longer forage thus decreasing overall mixing time. The counter-knives are positioned diagonally with respect to the auger axis and jointed at the top, thereby reducing the space between the counter-knife and the auger and increasing the contact surface with the fodder.
Even quicker chopping and mixing with the KUHN EUROMIX I mixer

High mixing quality for optimum rumination!

For a healthy herd, the ration must be evenly mixed and perfectly distributed, no matter what the levels of dry matter are.
The EUROMIX range’s mixing auger was designed with the chopping performance of long fibres in mind, as well as preserving wetter fodders such as maize silage.
Various configuration options tailor the machine to your needs.
KUHN EUROMIX I mixer: high mixing quality for optimum rumination

Weighing system: choose your level of data

Independent chassis on KUHN EUROMIX I mixer for weighing with the machine unhitched!

Independent chassis for weighing with the machine unhitched!

Standard on EUROMIX models, large section chassis provide weighing stability and accuracy. The chassis is the main part of the machine and gets put under high levels of stress during loading, transport and unloading phases.
The longevity of the weigh cells is guaranteed as they are positioned between the tub and the chassis. It is this design that allows weighing operations to be performed while the machine is unhitched (as the weigh cells are still under stress). The option to fit your machine with a battery kit will allow the weighing system to be powered without being connected to the tractor.

Feed Tracking BRONZE: a step towards traceability

With KUHN Feed Tracking BRONZE, it’s easy to ensure feed traceability. The data is transferred via a memory cartridge. The system provides one-way data transfer from the KDW 341 unit on your EUROMIX mixer wagon to your farm office computer.
You can save and track all the quantities loaded for the different types of fodder, the quantities distributed, and dates and times when the operations were performed.
KUHN Feed Tracking BRONZE can be installed on the farm office computer in minutes. The files are extracted in .txt format and can be converted to Excel format. Mixing times can also be programmed on the unit. A beeping sound will inform you when the mixing is complete.
KUHN Feed Tracking BRONZE data management software: simplified data transfer for your KUHN EUROMIX I mixer

Feed Tracking SILVER: two-way data transfer

The KUHN Feed Tracking SILVER data transfer system requires the KDW 361 weighing unit on your EUROMIX mixer wagon. The transfer is done via USB drive and is possible in both directions: from the KDW 361 weighing unit to the office computer and vice versa. You can define the rations on your computer using your usual software and then transfer the loading programs to your EUROMIX mixer wagon.
You can also program the weighing unit from your computer. With the SILVER version, you can print reports required for driver records to keep track of the work completed.
With the KUHN Feed Tracking SILVER data management programme, your KUHN mixer allows for two-track data transfer

Feed Tracking GOLD: stock management assistance

KUHN Feed Tracking GOLD has all the same features as the SILVER version (transfer via USB), along with stock management assistance for your different types of fodder and concentrates.
Just define the minimum stock threshold for your different products, and you are automatically informed once the threshold is reached. If you input your suppliers, they will also be informed of your stock level.
KUHN Feed Tracking GOLD also requires the KDW 361 unit.
KUHN Feed Tracking GOLD software, helping you manage your feed stock

Feed Tracking OPUS: maximum automation of the functions

KUHN Feed Tracking OPUS has all the features of the GOLD version and also provides herd activity reports including dairy production and ADG.
You’ll be able to monitor your herd performance at a glance with the easy-to-read graphs.
KUHN Feed Tracking OPUS also prepares fodder and concentrate feed orders for your usual suppliers based on your consumption. All you have to do is approve the purchase orders.
KUHN Feed Tracking OPUS software, for maximum automation of your feed management functions

Select the feeding system: a lot of possibilities!

Distribution chutes on KUHN EUROMIX I mixer: express delivery!

Distribution chutes: express delivery!

These distribution chutes allow for quick and simple feed delivery to floor-level feeding passages.
Distribution chutes can be fitted upon request at the front right or left, rear right or left, etc. for feed delivery in all types of building configuration, even in buildings with no separate exit. The EUROMIX mixer wagon is fitted with a deflection plate to avoid driving over the ration fed out. The protective canvas prevents fodder being projected beyond the trough.

Tilting conveyors to adapt to all types of troughs

The EUROMIX range can be fitted with a large selection of hydraulically tilting conveyors to deliver feed to troughs or feed bunkers. The PVC tilting conveyors belts come in different lengths. They start up automatically when the door hatch is opened to prevent jamming at the tub outlet. The EUROMIX tilting conveyors are quiet, always clean and easy to service: simply by adjusting the belt tension on a regular basis.
The tilting conveyors of the KUHN EUROMIX I range are quiet and easy to service

Equipment

KUHN products visual

Media

Available applications: EUROMIX I - 1 auger

Download on the App Store

Check out all of our KUHN apps to optimise your farm business

Get it on Google Play