GF 1012 T tedders

GF 1012 T machine silhouette

Field pickets deserve your attention too

Tedders available in two working widths (8.70 m and 10.80 m) for medium to large-sized farm productions. They are equipped with the HLC (Headland lift Control) rotor lift system for fast and effective manoeuvres.

Find a dealer near you

GF 1012 T range include 8 and 10 rotor tedders with working widths of 8.70 m and 10.80 m. Narrow fields will no longer be an issue for users of these mounted tedders thanks to the HLC (Headland Lift Control) rotor lift system . Simply activate the valve to lift the rotors a minimum of 50 cm off the ground, in less than 5 seconds.
They are also equipped with all the components that have made KUHN tedders such a great success over the years, both in terms of capacity and forage quality.
GF 8712 T at work

Your benefits

Quick and easy manoeuvres

The GF 10812 in HLC (Headland Lift Control) position

50 cm in less than 50 seconds with the HLC  system

Benefit from the HLC system that raises the rotors at headlands. Your central rotors will reach a height of 50 cm and the outer ones will rise even higher.
You'll feel more confident and gain work output with these easy and manouverable teddersl:
  • Reverse into pickets and corners.
  • Headland turns made easy.
  • Access multiple fields without folding the machine. Ditches are no longer a problem!
The high ground clearance of the rotors prevents any forage build-up when passing over larger swaths.

Ultra-compact for extra road safety

Whether on roads or in the shed, our new tedders have been designed to save space and to be easy to manoeuvre operator comfort is a must!.
(3 meters wide and 3.15 and 3.30 meters high respectively for the GF 8712 T and GF 10812 T) These machines are very easy to handle.
The 3-point linkage system and cleverly placed transport wheels provide just the right weight balance between the machine and the tractor for rotor lift during windrow crossing or folding/unfolding.
Wide transport wheels (300 mm) located close to the machine's pivot axis enable easier manoeuvring. They make these machines reactive when turning and easier to drive.
GF 10812 in transport position

Reduced maintenance

The DIGIDRIVE system

DIGIDRIVE: revolutionise tedding

When a KUHN engineer invented this drive concept, tedding entered a new era.
From that moment on, it became possible to drive a very large number of rotors and fold them to an incredibly compact size, and all this without any maintenance. A real revolution!
Since the launch of the DIGIDRIVE finger drive system twenty years ago, more than a million rotors have been working all around the world, tedding forage with exceptional reliability. The DIGIDRIVE system is made of case-hardened steel and requires no maintenance.

Rotor housings made to last

The guidance is done large-diameter, double-row angular ball bearings (1). Thoroughly sealed to prevent lubricant leakage and impurities getting in (2). Robust mounting on the rectangular frame with spacers and long through-bolts (3). With these rotor housings, greasing points are limited to a few pivot points, allowing you to spend more time in the field and less doing maintenance!
The rotor housing made to last

Crop deflectors for clean wheels

Operating in young sugar-rich crops or long late-season crops can be a challenge. Forage can get wrapped around the wheel columns resulting in downtime spent cleaning it off. Benefit from crop deflectors, for models from GF 5902, that prevent forage getting wrapped around the wheel columns.
Crop deflectors on GF wheels

Top quality forage

GF 8712 T in HLC rotor lift

High quality forage, even in corners

The HLC system improves tedder reactivity considerably when reversing and manoeuvring. This ensures the quality of your forage over the entire plot, even in the narrowest field. The impressive height of the HLC rotor lift system means you can:
  • Easily pass over large amounts of forage without any of it building up around the wheels. The forage is turned once only, including the headland areas.
  • Reverse on uneven ground without picking up impurities (soil, stones) due to the rotors touching the ground.

Tedding like a 4-rotor

Experts are convinced. Small rotors produce better quality forage. According to the Weser Ems Chamber of Agriculture in Germany, they provide 33% faster drying time. The experts from the DLG (Agricultural techniques organisation) say that small rotors provide complete crop inversion and produce uniform grass distribution. View the test results!
Experts are convinced and those who use them swear by them. For farmers whose goal is to harvest a first class crop there are so many advantages to having small rotors:
  • Working with a wide angle of attack while turning the crop
  • Fast and uniform drying.
  • Fully effective crop inversion.
  • Uniform distribution.
  • Exceptional ground adaption.
  • Mounted tedders with less overhang to reduce lift requirements.
  • Reduced power requirement.
The individual rotor joints, identical spacing and asymmetrical tines ensure that all the forage is tedded, even when it is long or dense and on uneven ground. Adjust pitch angle in just 2 minutes (no tools required) to adapt to the quantity of forage.
Results of the DLG Fokus Test on forage turning by tedders

Integral pick-up with asymmetrical tines

Asymmetrical tine length with longer outer fingers produces high quality tedding. The outer finger moves into the forage earlier compared to a symmetrical design. This ensures a more complete tedding operation, even on field borders and between rotors, due to better tine overlap in this tricky area. Moving into the forage earlier means that the actual working width of each rotor (therefore the machine) is larger.
Tines move into the forage earlier with asymmetrical tines

GF 10812 T at work


Technical characteristics
Working width DIN (m)
Overall width in working position (m)
Number of rotors
Number of tine arms per rotor
Transport width (m)
Transport height (m)
Oblique wheel position setting
Raising the rotors on headlands - HLC function
Wheel deflectors
Tine guards
Pitch angle adjustment - without tool
Rotor drive
Secondary PTO shaft
Free wheel integrated in the central gearbox
Tyres on central rotors
Tyres on outside rotors
Tyres on transport undercarriage
Setting into transport position
Required tractor hydraulic connections
Theoretical tractor power requirement (kW/hp)
Road lights and signalling
Approx. weight (kg)
GF 8712 T GF 10812 T
8.70 10.80
9.12 11.20
8 10
6 6
2.99 2.99
3.15 3.30
As optional equipment (rods+cylinder) As optional equipment (rods+cylinder)
As standard As standard
As standard As standard
As standard As standard
2 positions 2 positions
By exclusive DIGIDRIVE multiple finger couplings By exclusive DIGIDRIVE multiple finger couplings
With torque limiter With torque limiter
As standard As standard
18 x 8.5 - 8 18 x 8.5 - 8
16 x 6.50 - 8 16 x 6.50 - 8
26 x 12.00 - 12 26 x 12.00 - 12
Hydraulic vertical folding of the rotors followed by frontward pivot and positioning of the wheel train Hydraulic vertical folding of the rotors followed by frontward pivot and positioning of the wheel train
3-point Cat. 2 3-point Cat. 2
1 DA with floating position 1 DA with floating position
36 / 50 40 / 55
As standard As standard
1760 1980


Available applications: GF 1012 T

Download on the App Store

Check out all of our KUHN apps to optimise your farm business

Get it on Google Play