PZ 960 drum mower silhouette

Easy towing and high output

The KUHN PZ 960 front and rear combination offers you our maximum mowing width and the highest working rates. Non-stop mowing at the highest level of quality is guaranteed by the unique LIFT-CONTROL suspension system.

Find a dealer near you

If you want to mow wide working widths of up to 8.95 m, then the PZ 960 is the right drum mower combination for you. Farms with tractors in the 74 to 110 kW/100-150 hp range can now achieve maximum mowing widths, and therefore the highest work rates.

The two rear units of the mower combination are built from a tested and proven design. With the legendary drum design of more than 25,000 front and rear mounted mowers sold worldwide; these mower units have proven themselves in real, tough operating conditions. One special feature is its arrangement of mower drums: large outer drums and small inner drums produce a swath form to match the intake and follow the contours of the land perfectly. The freely rotating saucers make this mower very easy to pull.

The PZ 960 is fitted as standard with LIFT-CONTROL. This hydro-pneumatic suspension system continually ensures a uniform ground pressure, lower pulling power requirement and non-stop mowing.
PZ 960 drum mower at work

Your benefits

Cleverly designed components for optimal performance

Flat sided drums

Flat sided drums

Round drums do not transport well, that is why KUHN uses drums with two flat sides for optimal crop transport without the risk of blockages. Movement of the crop has an impact on the mowing quality. It is for this reason that KUHN has chosen to use screw-on transport strips.

Continuous height adjustment

The continuous cutting height adjustment on top of the mower allows you to set the optimum cutting height in changing conditions in an easy and safe way. This allows you for example to mow a little higher in the autumn in order to reduce soil contamination in your forage.
Continuous cutting height adjustment

Freely rotating saucers

The freely rotating saucers have a major advantage. In uneven ground conditions, the saucer 'rotates' over the ground rather than sliding, thus protecting the stubble and reducing PTO power requirement. The positive effects of reduced crop contamination will be particularly noticeable on sensitive soils such as boggy land.
The saucers of the drum mower can rotate freely

Quick knife exchange

Using the special tool, you can push the knife holder down and simply replace the knifes. It is a quick and secure system.
Using a hook shaped tool, you can simply replace the knifes.

Perfect swath formation

The proven design with its uneven sized diameter knife plates has great benefits for the front mower: a clean swath formation, less crop contamination, perfect ground following and high throughput with a low PTO power requirement.

The arrangement of the drums has the added advantage that it is fuel-saving. Swath discs are available as an option.
The uneven sized diameter knife plates create a clean swath formation.

Safety and comfort when you need it

On encountering any obstacles, the material of the side cover bends, without breaking or damaging the mower.

FLEXPROTECT side covers

Damage to the side covers is now a thing of the past. The KUHN FLEXPROTECT flexible side covers add a new dimension to these mowers with their design made of polythene. On encountering any obstacles, the material of the side cover bends, without breaking or damaging the mower. The material then returns back to its original shape.

The LIFT-CONTROL system: smart kinetics

Improve the quality of your forage and reduce downtime by using the exclusive LIFT-CONTROL suspension system. LIFT-CONTROL is much more than just a suspension system with a nitrogen accumulator replacing the traditional spring. It is an active and dynamic hydro-pneumatic suspension system making use of the kinetic forces that act on the mower unit.

  • The clear benefits of the KUHN LIFT-CONTROL are: Constant ground pressure
  • Excellent terrain following
  • Non-stop safety breakaway
  • Less crop contamination
  • Minimal damage to the turf

It is when mowing on slopes that the LIFT-CONTROL system shows all its advantages and is reflected in a distinct reduction of fuel consumption and higher working rate.
LIFT-CONTROL is a suspension system with a nitrogen accumulator replacing the traditional spring. The system is making use of the kinetic forces that act on the mower unit.

Adjust pressure easily and accurately

Because time is money, adjusting the weight-reducing pressure takes just a few seconds! Through the accumulators, the ground pressure can be adjusted with great precision to adapt to the harvesting conditions, easily from the tractor seat. Therefore, on wet land minimal pressure on the ground prevents crop contamination. Lateral force, wear on the drums and tensile strength will be significantly reduced. As the force on the mower unit increases, the LIFT-CONTROL system automatically raise the unit.The greater the force, the lighter the mower unit gets.
Through the accumulators, the ground pressure can be adjusted with great precision to the harvesting conditions, easily from the tractor seat.

Easy access to the drums

The front cover can be folded away, allowing easy access to the blades. This is perfect for daily inspections and mower maintenance.
The foldable front and side protective covers can be lifted upwards, convenient for daily inspection and blade exchange.

Quick and easy maneuverability

The PZ 960 mower combination ensures an excellent weight transfer for the best maneuverability on sloping terrain.

Compact design for best weight transfer

The PZ 960 has a weight of 1900 kg. With one front mounted mower and two mowers attached to the rear of the tractor, this mower combination ensures an excellent weight transfer for the best maneuverability on sloping terrain.

Adjustable working width and overlap

The working width of the mower can be adjusted to three widths: 8.40 m, 8.65 m and 8.95 m. This enables you to work with front mowers of different working widths and allows you to choose the right overlap when working on slopes.
The working width of the mower can be adjusted in three levels.

Reverse drive combination

With minor adjustments and an attachment kit for the front mower, it is possible to use the triple mower in a reverse drive combination.
With minor adjustments and a special kit it is possible to use the triple mower in a reverse drive combination

PZ 960 triple drum mower in road transport on a country road

Specifications

Technical Characteristics
 
Working width (m)
Transport width (m)
Transport height (m)
3-point linkage
PTO speed (min-1)
Minimum required tractor hydraulic connections
Minimum PTO power requirement kW(hp)
Transport position
Headland position
Headland cylinder
Transport folding cylinder
Single side lifting control
Suspension
Ground pressure compensation
Safety breakaway system
Primary drive
Secondary drive
Number of drums
Number of blades
Cutting height adjustment
Cutting height range (mm)
Average swath width ca. (m)
Warning signs and lighting set
Weight min - max (kg)
PZ 960
adjustable: 8,40 – 8,65 – 8,95
3,00
4,00
cat. 2
1000
1 single and 1 double acting valve with floating position
85(116)
hydraulic folding 90° vertically
hydraulically
as standard
as standard
as standard electrically
centrally
hydro-pneumatic
hydraulic NON STOP “LIFT-CONTROL”
PTO drive shaft
intermediate PTO drive shafts with freewheel and slip clutch
2 x 4
2 x 12
continuously
36
1,30
as standard
1840 - 1890

Media